Is there a rule for mixing different size panels to connect to an mppt charge controller? I have a set of 24V panels. (6) are 320 watt and (2) is 370watt.

I have installed two 5kva MPPT inverters, each with separate battery bank and separate front end load of appliances. The only thing shared between both is PV input which is a 96 volt 6000 Watts array.

I'm curious if I can use both a pwm and a mppt controller on a single battery bank at the same time.

Typical recommended MPPT nominal voltage input for a given system is double the battery bank voltage.

If I were to have a system with solar-panels, MPPT charge-controller, invertor, battery-bank, load; and a year later I wanted to combine more solar-panels.

I am interested in analyzing the performance of the system after adding MPPT charge controller. can any one help me how can i performance this task with above mentioned experimental setup?

I'm wondering if there are any issues I should be aware of when connecting two MPPT controllers to one battery bank. I currently have Kyocrea KC130 panels wired in series (24vdc) handled by an Outback …

Morning all, I have an MPPT charge controller rated for 40A, and can take an input of 12 or 24v, and output 12 or 24v.

Yes, the GF fuse was removed from the new MPPT 60 so there's only one and it tests good and I've tried swapping it between the two MPPT60s. I've completely disconnected the PV lines into the …

Just finished building my first solar system for an RV and when I flipped on my solar, my MPPT 60 is reading that it's in night mode.